LINEARdrive 100/A
LIN100A : LINEARdrive AC, 100W, DMX/DALI, UI, 4 cont. chan., const. volt., 4x 12/24V outp., long metal/plastic
LINEARdrive 100/A delivers 8A and is DALI and DMX compatible. The end caps function as wire restraints and make the driver perfectly suited for independent installations. LINEARdrive 100/A has four separately controllable LED outputs, which can be used for wide range of full-colour (RGBW), dynamic LED lighting applications.
You can configure the driver over its intuitive, 3-button user interface with display: it lets you configure the number of channels, DMX or DALI settings for networked mode and show, colour and dim values for standalone operation.
Features
- HydraDrive: provides the smoothest flicker-free high-performance dimming to dark for every fixture
- Tunable dynamic response
- LEDcode technology: configurable design to work with most constant current LED modules and arrays, while providing a connection point to integrated peripheral controls
Benefits
- Industry-best dimming performance for your fixture/application
- Dynamic response can be tuned to fit any content – from exceptionally smooth fades in architecture to fast-paced video in entertainment
- Compatible with enclosure system DRYverbox 100/M
Certifications
- BIS
- CE
- EN 61347-1/-2-13, EN 62384, EN 55015,EN 55022, EN 61000-3-2, EN 61547, EN 62386-101/102/207
- UL: Recognized Component (E333135), according to UL131 0 and UL8750. US/Canada: Class 2 output.
- ENEC by DEKRA
- EL
- RCM by SAA
Input characteristics
Nominal input voltage range AC 120 – 250V (ENEC), 120 – 277V (UL)
Nominal input voltage DC 120 – 275V
Maximum input current AC 1.05A @ 120V
Input frequency range 50 – 60Hz
Power factor at full load > 0.94
THD at full load < 10%
Maximum inrush current AC 35A 240μs @ 120V
Surge protection 3kV (L to N) ; 4kV (L/N to GND)
Maximum standby power < 0.5W
Output characteristics
LED output load
- RGBW @ 12V: 2.08A
- RGB @ 12V: 2.76A
- RGBW @ 24V: 1A
- RGB @ 24V: 1.33A
- 5A maximum common anode
For UL Class 2:
- RGBW @ 12V: 1.25A per output
- RGB @ 12V: 1.66A per output
- RGBW @ 24V: 1A per output
- RGB @ 24V: 1.33A per output
Maximum LED output power 100W
Number of LED outputs 4 (UL Class 2)
LED output current 2.8A absolute maximum rating per output
LED output voltage 12 – 24V DC
Circuit protection : To prevent excessive output current from damaging the LED driver, it is highly recommended to use circuit protection appropriate for your application’s nominal and inrush current requirements.
Control characteristics
Control channels 4
Control protocol DMX/RDM
| Weight | 0.71 kg |
|---|---|
| Dimensions | 38.80 × 4.20 × 3.00 cm |
