LINEARdrive 100/A

LIN100A : LINEARdrive AC, 100W, DMX/DALI, UI, 4 cont. chan., const. volt., 4x 12/24V outp., long metal/plastic

192.4 € HT / 230.88 € TTC
Available online shop : 6 unit(s)
Any further information, please contact us

Warranty: 5 Years

LINEARdrive 100/A delivers 8A and is DALI and DMX compatible. The end caps function as wire restraints and make the driver perfectly suited for independent installations. LINEARdrive 100/A has four separately controllable LED outputs, which can be used for wide range of full-colour (RGBW), dynamic LED lighting applications.

You can configure the driver over its intuitive, 3-button user interface with display: it lets you configure the number of channels, DMX or DALI settings for networked mode and show, colour and dim values for standalone operation.


  • HydraDrive: provides the smoothest flicker-free high-performance dimming to dark for every fixture
  • Tunable dynamic response
  • LEDcode technology: configurable design to work with most constant current LED modules and arrays, while providing a connection point to integrated peripheral controls


  • Industry-best dimming performance for your fixture/application
  • Dynamic response can be tuned to fit any content – from exceptionally smooth fades in architecture to fast-paced video in entertainment
  • Compatible with enclosure system DRYverbox 100/M


  • BIS
  • CE
  • EN 61347-1/-2-13, EN 62384, EN 55015,EN 55022, EN 61000-3-2, EN 61547, EN 62386-101/102/207
  • UL: Recognized Component (E333135), according to UL131 0 and UL8750. US/Canada: Class 2 output.
  • EL
  • RCM by SAA

Input characteristics
Nominal input voltage range AC 120 – 250V (ENEC), 120 – 277V (UL)
Nominal input voltage DC 120 – 275V
Maximum input current AC 1.05A @ 120V
Input frequency range 50 – 60Hz
Power factor at full load > 0.94
THD at full load < 10%
Maximum inrush current AC 35A 240μs @ 120V
Surge protection 3kV (L to N) ; 4kV (L/N to GND)
Maximum standby power < 0.5W

Output characteristics
LED output load

  • RGBW @ 12V: 2.08A
  • RGB @ 12V: 2.76A
  • RGBW @ 24V: 1A
  • RGB @ 24V: 1.33A
  • 5A maximum common anode

For UL Class 2:

  • RGBW @ 12V: 1.25A per output
  • RGB @ 12V: 1.66A per output
  • RGBW @ 24V: 1A per output
  • RGB @ 24V: 1.33A per output

Maximum LED output power 100W
Number of LED outputs 4 (UL Class 2)
LED output current 2.8A absolute maximum rating per output
LED output voltage 12 – 24V DC
Circuit protection : To prevent excessive output current from damaging the LED driver, it is highly recommended to use circuit protection appropriate for your application’s nominal and inrush current requirements.

Control characteristics
Control channels 4
Control protocol DMX/RDM

Weight 0.71 kg
Dimensions 38.80 × 4.20 × 3.00 cm

Abonnez-vous à notre newsletter !