PWPP RM P4 XLR5F REAR eDMX to DMX/RDM node, 4 isolated XLR5-Female ports on the rear panel, rackable, configuration via screen/buttons Connect DMX512 control devices and send data over an Ethernet network to DMX512-capable end devices such as intelligent lighting fixtures, LEDs, Dimmers, and more. Each port can be configured as an Input or Output as needed. Advanced features include extensive protocol support, slot-by-slot patching using multiple sources, cross-fading on priority change, and signal loss behavior. Multiple connector options are available, such as 5-Pin XLR, terminal block, and RJ45 etherCON®. Status LEDs for each port provide instant confirmation of DMX activity and direction. The LCD display and encoder knob allow for front panel configuration and reporting of the most commonly used features, such as IP address and subnet mask, port direction, and protocol selection. Different Ethernet protocols may be merged together and prioritized. Download Pathscape for free : Click here. Any further information, please contact us Description Documentation 4 ports configurable as input (DMX512 to IP conversion) or output (IP to DMX512 conversion) Isolation between each DMX port: 3000V XLR-5pin female connectors Supported DMX over IP protocols: Pathway ssACN (Secure sACN) E1.31 Streaming ACN (sACN) Art Net Pathport Protocol ShowNet Configuration interface LCD screen + Button on the front panel 19-inch rack mount Power supply 24-48VDC or PoE Operating temperature: -10°C to 50°C Relative humidity: 5-95%, non-condensing CE certification Pathway Pathport Pwpp Rm - Datasheet Pathport Install Guide Pathway Pathport Pwpp Rm P4 Manual Pathway Pathport And Via Networking Brochure PWPP RM - CE Declaration More information on Pathway's website, click here.