Convertisseur 1 à 2 entrée(s) 0-10V vers DALI, Plug&Play

Bridges that enable 0-10V control of eldoLED DUALdrive drivers for Tunable White applications. No DALI commissioning is required: two 0-10V controllers dictate the intensity and colour temperature.

48.5 € HT / 58.2 € TTC
Temporarily out of stock.
Any further information, please contact us

Warranty: 5 Years

The SC 4202/L is intended for use with the LightShape-enabled DUALdrive, to translate signals from two 0-10V controllers into a DALI signal for intensity and colour temperature. It provides up to 30mA of DALI bus power, thus supporting up to 15 LED drivers.

The device is intended for indoor use, to be installed completely enclosed within the end user listed enclosure in accordance with the manufacturer installation instructions and in compliance with NEC. The SC 4202/L is available in the USA only.


  • 0-10V to DALI signal translation
  • For Tunable White applications
  • Up to 30mA of DALI bus power for 15 LED drivers
  • Linear dimming curve
  • Recommended controller: Sensor Switch sPODMRD EZ


  • Plug and play: no complicated DALI commissioning (DALI Group 0 : Intensity – DALI Group 1 : Color temperature)
  • For zone or individual luminaire control


  • CE
  • UL listed
  • ENEC by OVE
Weight 0.03 kg
Dimensions 16.50 × 3.00 × 2.40 cm

Abonnez-vous à notre newsletter !