PWREP DIN P8 RDMHUB
DMX/RDM splitter with 8 opto-isolated DIN rail ports.
The PWREP DIN P8 RDMHUB has several operating modes:
- Splitter 1 input to 7 basic outputs
- Automatic detection of the DMX input signal on any port and according to four operating modes.
- Merge of 2 DMX inputs (manual or according to priority)
- Each input can be DMX in or out (automatic or manual detection)
- Management of priorities and merge modes
Download Pathscape for free : Click here.
Any further information, please contact us
- 8 bi-directional DMX/RDM ports
- Isolation between each DMX port: 3000V
- Isolation between each DMX port and power supply: 1500V
- Automatically detects incoming DMX signals and distributes them according to the operating mode used:
- RDM Hub mode: Detects the DMX port used as input and copies the output signal to all other ports
- RDM A/B mode: Input selection via external A/B switch
- Priority mode: Use port A as input when a DMX signal is active. Port B is used as an input when nothing arrives on port A. The DMX outputs are not RDM in this mode.
- Merge mode: Merge HTP (highest takes precedence) of all ports on which an incoming DMX signal is detected. The remaining ports are used for output. DMX outputs are not RDM in this mode.
- Configurable DMX speed and signal loss behavior
- DIN rail mounting
- Supply voltage: 24-48Vdc
- Operating temperature: -10°C to 45°C
- Relative humidity: 5-95%, non-condensing
- CE certification